VEHICLE WATER PUMP ASSEMBLY ISLAND
The island has been designed in order to attain a high level of flexibility with a quick equipment change. Up to 200 different types of water pump used for the cooling of the motor vehicle engine can be produced on this type of system: the equipment change, in the most complex event can be performed in 3 hours. The majority of the movement carried out by the machine is managed by brushless electrical motors controlled in both space and speed. The main characteristics of the machine are the drivers, entirely electronic, which allow for the development of forces up to 4000Kg, with a driving precision of 0.1 mm.

SEMI-AUTOMATIC WATER PUMP ASSEMBLY AND TESTING ISLAND
The island is very suited to the production of small batches of water pumps for the automobile industry. The flexibility of its usage, linked to the quick re-equipping and to the easy programming, allows to produce however up to 120 pumps per hour with only one operator maintaining the characteristics of high quality along the entirely automatic production line. The presence of the testing station with rotation and microleak holding test guarantees the quality of the final product.

SEMI-AUTOMATIC SPHERICAL VALVE ASSEMBLY ISLAND
This machine has been designed in order to realise small production batches with increased speed in the equipment change. The main characteristic of the machine is the entirely electronic screwing process phase which allows passing from 10 Nm to 1200 Nm of tightening in the event of 2” valves.The machine can assemble and test the microleak holding (carried out using “recovery” techniques with all measurements according to Pascal) of “straight”, “right-angled” and “T” valves in sizes ranging from ¼” to 2”.

ISOLA PREPARAZIONE PORTE BOX DOCCIA
In this case, the machine prepares the parts necessary for the subsequent assembly of a shower box for domestic use. The main characteristic is the increased flexibility which allows for the assembly of the features in various configurations. The assembly takes place by means of the screwing process of the parts after the drilling process. Each group is completed in 18 seconds.